LED IN HALL & WAREHOUSE

Shift operation with long burning times, high altitudes, high temperatures and contaminants in the air, together with the brightness requirements, place high demands on the lighting solutions. With instaLED we define it as the industry standard.

instaLED

Our industrial standard LEDs take into account the tough everyday conditions in production, the workshop and the warehouse. All components of our LEDs are designed for this challenge. This is the only way we can guarantee that your investment will not only pay for itself, but will also pay off beyond the amortization period.

We are not satisfied with less than the optimum.

ac_unit

Cooling

The ACT Cooling Technology with external heat sinks made of aluminum or ceramic optimally dissipates the heat from the LED chip and ensures that the light stays on for years.

Power Supplies

Our power supplies are equipped with high quality capacitors. Here, too, we attach great importance to cooling. This ensures the long life expectancy.

highlight

LED CHIP

We only use high-lumen LEDs from leading manufacturers. These are supplied with low current in order to avoid excessive heat.

timeline

Efficiency

Power supplies and LEDs are optimally matched to one another for continuous load and efficiency. With special covers we manage to achieve up to 190 lm / W.

instaLINE - LED trunks, LED light carrier

The clever instaLINE integra LED light carriers fit more than 15 different trunking systems (Ridi, Trilux, Siteco, relatio etc.). So you can continue to use your old carrier. You only need one LED light carrier, even if you upgrade light strips from different manufacturers. Of course, with our conventa light carrier, instaLINE also offers you the option of using LED tubes, because the conventa comes without a ballast. If you need to expand or want to renew the suspension system, our flexible instaline gives you all the options of a modern suspension system. 

instaLINE - LED trunks, LED light carrier

integra uniform

  • Universal LED support for over 15 support systems, e.g. for Ridi, Trilux, Zumtobel, Osram, Phlips, Siteco, Regiolux and many more
  • fixSpring fastening system
  • Length 143,7 cm (T5)
  • Light color 4000-6000k (Kelvin)
  • Luminous efficacy up to 160lm / W (lumens per watt)
  • Nominal luminous flux switchable 4.000-12.000lm (lumens)
  • Nominal power switchable from 25 to 75W (watts)
  • Color rendering up to CRI> 90
  • Aperture in clear 30 ° / 60 ° / 90 °, matt 120 °
  • 0-10V dimming / DALI control
  • suitable for multi-shift operation
  • Certificates ENEC, CE, ROHS, WEEE

instaLINE - LED trunks, LED light carrier

integra plug fit

  • LED carrier plug-compatible for over 15 support systems, e.g. for Ridi, Trilux, Zumtobel, Osram, Phlips, Siteco, Regiolux and many more
  • Fixclick fastening system
  • Length 143,7 cm (T5 replacement), 153 cm (T8 replacement
  • Light color 4000-6000k (Kelvin)
  • Luminous efficacy up to 160lm / W (lumens per watt)
  • Nominal luminous flux switchable 4.000-12.000lm (lumens)
  • Nominal power switchable from 25 to 75W (watts)
  • Color rendering up to CRI> 90
  • Aperture in clear 30 ° / 60 ° / 90 °, matt 120 °
  • 0-10V dimming / DALI control
  • suitable for multi-shift operation
  • Certificates ENEC, CE, ROHS, WEEE

instaLINE - LED trunks, LED light carrier

convent

  • LED tube holder for relatio ITX support system
  • T8 / G13 base
  • 1 and 2 lights
  • Length 153cm (T8)
  • Light color 4000-6000k (Kelvin)
  • Luminous efficacy up to 160lm / W (lumens per watt)
  • Nominal luminous flux 2.400-10.500lm (lumens)
  • Rated power 25-60W (watts)
  • Color rendering up to CRI> 90
  • Iris matt 120 °
  • suitable for multi-shift operation

instaSTOCK
instaSTOCK - LED hall spotlights

If you have to go high, with our instaSTOCK series, we offer indoor floodlights that leave nothing to be desired. instaSTOCK is available as a modern "UFO" variant or in a linear design, which has proven particularly useful in shelf aisles. Of course there are various optics in clear or matt plastic or glass. With the optional presence sensors, dimming or a DALI control, you can further reduce power consumption.

instube - LED tube T8

Venus

The hall downlights with integrated sensors for daylight control, presence and dimming:

  • aluminum housing
  • Power pack inside
  • Degree of protection IP65
  • Diameter 250-450mm
  • Light color 3000-6000k (Kelvin)
  • Luminous efficacy up to 165lm / W (lumens per watt)
  • Nominal luminous flux 12.000-41.250lm (lumens)
  • Rated power 100-250W (watts)
  • Color rendering up to CRI> 80
  • Flicker free
  • Iris matted / clear 120 °, clearly focused 30 ° / 60 ° / 90 °
  • intelligent control
  • Sensor technology for presence and daylight
  • controllable dimming
  • suitable for multi-shift operation
  • Certificates TÜV, CE, ROHS, WEEE

instube - LED tube T5

Uranus

  • Aluminum profile with polycarbonate cover
  • rotatable T5 / G5 base
  • Versions for KVG / VVG / EVG
  • available in 55cm, 85cm, 115cm, 145cm
  • Light color 3000-6000k (Kelvin)
  • Luminous efficacy up to 190lm / W (lumens per watt)
  • Nominal luminous flux 19000-47500lm (lumens)
  • Rated power 100-250W (watts)
  • Color rendering up to CRI> 90
  • Iris matt 120 °
  • suitable for multi-shift operation
  • Certificates ENEC, CE, ROHS, WEEE

instube - LED tube T5

saturn

  • aluminum housing
  • Meanwell power supply inside
  • Degree of protection IP65
  • Dimensions 490x138x116mm
  • Light color 4000-6000k (Kelvin)
  • Luminous efficacy up to 160lm / W (lumens per watt)
  • Nominal luminous flux 13.500-24.000lm (lumens)
  • Rated power 90-150W (watts)
  • Color rendering up to CRI> 80
  • clearly focused 90 °
  • 0-10V dimming
  • suitable for multi-shift operation
  • Certificates CE, ROHS, WEEE

instaPROOF

Our instaPROOF series offers the necessary solution where it is too humid or where break resistance is required. Our lights are available for all damp areas and also optionally for the food or livestock area. We do without plastic clips and clips and use them in stainless steel - they won't break even after years. On request with up to IP69 and IK10, so that nothing stands in the way of food certification. 

LED moisture-proof tub light

convent

  • LED moisture-proof diffuser luminaire
  • T8 / G13 socket for LED tubes
  • 1 and 2 lights
  • Length 120cm / 150cm
  • Light color 3000-6000k (Kelvin)
  • Luminous efficacy up to 160lm / W (lumens per watt)
  • Nominal luminous flux 2.400-10.500lm (lumens)
  • Rated power 25-60W (watts)
  • Color rendering up to CRI> 90
  • suitable for multi-shift operation

instaPROOF LED damp room

toja

  • LED moisture-proof luminaire
  • Aluminum housing with polycarbonate cover
  • Degree of protection IP66 / IK10
  • Length 60cm / 120cm / 150cm
  • Light color 4000-6000k (Kelvin)
  • Luminous efficacy up to 150lm / W (lumens per watt)
  • Nominal luminous flux 2.400-9750lm (lumens)
  • Rated power 25-65W (watts)
  • Color rendering up to CRI> 95
  • Iris matt / clear 120 °
  • Flicker free
  • optional 0-10V or DALI dimming / control
  • suitable for multi-shift operation
  • Certificates ENEC, CE, ROHS, WEEE

instaFOOD - LED for the food industry

yara (food standard)

  • LED moisture-proof luminaire for food and cattle breeding applications
  • Polycarbonate tube with integrated LED board and stainless steel end caps / clamps
  • HACCP / NSF / DLG standard
  • Degree of protection IP69 / IK10
  • Length 60cm / 120cm / 150cm
  • Light color 4000-6000k (Kelvin)
  • Luminous efficacy up to 150lm / W (lumens per watt)
  • Nominal luminous flux 2.600-6.000lm (lumens)
  • Rated power 20-40W (watts)
  • Color rendering up to CRI> 95
  • Iris matt 120 °
  • Flicker free
  • optional 0-10V or DALI dimming / control
  • suitable for multi-shift operation
  • Certificates ENEC, CE, ROHS, WEEE

your image
instaSTOCK - LED hall spotlights

Paint booths? Explosion-proof areas? For more than 65 years, Jung Leuchten has stood for a family company that develops and produces high-quality technical lights for a wide range of applications. With this experience and the constant further development of the products, we have a strong partner at our side. Especially when it comes to converting paint booths and everything to do with paint inspection, Jung offers the entire repertoire of explosion-proof lights. With the LED inserts, we convert your painting booths to efficient, bright light that leaves nothing to be desired in terms of quality.

instube - LED tube T8

Workplace light

The JUNG workplace luminaires are sheet steel luminaires which are used in industrial and craft workplaces. Different housing designs lead to a wide variety of fastening options. The cover of the light exit consists of a single-pane safety glass pane (ESG). The toughened safety glass pane is mounted in a sheet metal frame, which is connected to the luminaire housing with clamp locks on one side and hinges on the opposite side.

instube - LED tube T8

Cabin light

The JUNG cabin lights are mainly used in painting systems in the automotive industry. There are two main types of cabin lights. On the one hand, these are surface-mounted luminaires, which are mounted on the customer's glass elements from the outside of the cabin and, on the other hand, built-in lights, which are mounted on the inside of the cabin. This lamp is characterized by a very flat design, which enables installation in cabin partitions. The cover of the light exit consists of a single-pane safety glass pane (ESG). The toughened safety glass is mounted in a sheet metal frame. Thanks to the certification for ex-zones 2 and 2 and the robust construction, the lights are also suitable for countless other uses.

instube - LED tube T8

floor lamp

The floor lights are walk-in lights with 1, 2 or 3 lamps, which are designed for testing surfaces of all kinds. The cover of the light outlet consists of a laminated safety glass pane (VSG), which is glued into a frame and inserted flush in the luminaire housing. In conjunction with the 3-lamp surface control lights, it is possible to remove a complete paint control ring.

instube - LED tube T8

Carriage light

Due to the in-house development, conception and flexible production of young lights, besides the standard product range, special lights or special designs can also be manufactured according to the most individual requirements for special requirements and different locations. Made of sheet steel with powder coating in all RAL colors or in stainless steel; with fluorescent tubes in modern LED technology; dimmable and with a wide variety of mounting options according to your wishes, in an explosion-proof version and other types of protection and approvals (IP, UL, CE, etc.) rotatable and swiveling, gladly also mobile on a mobile trolley.

instube - LED tube T8

indicator light

The surface indicator lights are designed to test surfaces of all kinds. With the help of innovative lighting technology, the slightest surface defects in lacquer and metal surfaces can be made visible to the human eye during the visual intermediate and final inspection. The light exit cover consists of a single-pane safety glass (ESG), which is mounted in a cover. In connection with the 3-flame floor lights, it is possible to set up a complete control ring. The surface indicator light is available as a special / carriage light on a mobile carriage with connection cable and switch, which enables flexible use in changing work areas.

instube - LED tube T8

LED inserts

With the Jung LED inserts and the corresponding upgrade kits, your existing lights in paint booths can be easily converted to LEDs. During the conversion, the luminaire is newly certified so that it also corresponds to ex zone 2 or 22. This is the most cost-effective alternative to maintain your inventory and still benefit from the advantages of efficient LED lighting. Of course, all wear parts are replaced during the conversion, seals and safety glass are replaced in accordance with the regulations. How to start into a safe future.

your image
instaPROOF

The EU ban on marketing inefficient HQL and HQI lamps often leads to the entire luminaire being replaced. This applies to hall downlights, parking lot, sidewalk and street lights. With the instaBULB a large number of them can still be used. We have solutions in 360 ° all around (full) for the standing installation and 180 ° downwards (half) for the horizontal installation. It's brand new instaBULB down for hall downlights that emit all of their light downwards. Of course in the industrial standard with external cooling surfaces made of aluminum.

LED HQI HQL replacement

down

  • Aluminum housing with polycarbonate covers
  • E27 and E40 base
  • Protection class up to IP64
  • Light color 4000-6000k (Kelvin)
  • Luminous efficacy up to 135lm / W (lumens per watt)
  • Nominal luminous flux 8.100-15.525lm (lumens)
  • Rated power 60-115W (watts)
  • Color rendering up to CRI> 80
  • Beam angle 120 °
  • suitable for multi-shift operation
  • Certificates CE, ROHS, WEEE

LED HQI HQL replacement

full

  • Aluminum housing with polycarbonate covers
  • E27 and E40 base
  • Protection class up to IP64
  • Light color 3000-6000k (Kelvin)
  • Luminous efficacy up to 150lm / W (lumens per watt)
  • Nominal luminous flux 4050-6450lm (lumens)
  • Rated power 27-63W (watts)
  • Color rendering up to CRI> 80
  • 360 ° beam angle on the side, 120 ° front
  • suitable for multi-shift operation
  • Certificates CE, ROHS, WEEE

LED HQL HQI replacement

half

  • Aluminum housing with polycarbonate covers
  • E27 and E40 base rotatable
  • Protection class up to IP64
  • Light color 3000-6000k (Kelvin)
  • Luminous efficacy up to 150lm / W (lumens per watt)
  • Nominal luminous flux 3.000-6.000lm (lumens)
  • Rated power 20-66W (watts)
  • Color rendering up to CRI> 80
  • 180 ° beam angle downwards
  • suitable for multi-shift operation
  • Certificates CE, ROHS, WEEE

your image
instaTUBE - LED tubes

The instaTUBE LED tubes to replace T8 / T5 fluorescent tubes in the industrial standard are available for both CCG and ECG. The matt cover is made of unbreakable polycarbonate. With the ACT Cooling Technology - the exposed aluminum profile - the resulting heat can be released directly into the environment. This ensures that the lights stay on for a long time, even in multi-shift operation. Of course it is instaTUBE certified by TÜV and also available in special lengths such as 104,7 cm. 

instube - LED tube T8

T8 APR

  • Aluminum profile with polycarbonate cover
  • rotatable T8 / G13 base
  • Versions for KVG / VVG / EVG
  • available in 60cm, 90cm, 105cm, 120cm, 150cm
  • Light color 3000-6000k (Kelvin)
  • Luminous efficacy up to 175lm / W (lumens per watt)
  • Nominal luminous flux 1170-5250lm (lumens)
  • Rated power 9-30W (watts)
  • Color rendering up to CRI> 90
  • Flicker free
  • suitable for multi-shift operation
  • Certificates TÜV, CE, ROHS, WEEE

instube - LED tube T5

T5 APR

  • Aluminum profile with polycarbonate cover
  • rotatable T5 / G5 base
  • Versions for KVG / VVG / EVG
  • available in 55cm, 85cm, 115cm, 145cm
  • Light color 3000-6000k (Kelvin)
  • Luminous efficacy up to 150lm / W (lumens per watt)
  • Nominal luminous flux 1050-3750lm (lumens)
  • Rated power 10-25W (watts)
  • Color rendering up to CRI> 90
  • Iris matt 120 °
  • suitable for multi-shift operation
  • Certificates ENEC, CE, ROHS, WEEE

instube - LED tube T5

T8 / 5 APR UV free

  • Aluminum profile with polycarbonate cover
  • rotatable T5 / G5 base
  • UV-free from 495nm
  • in all common lengths
  • Light color 3000k (Kelvin)
  • Luminous efficacy up to 110lm / W (lumens per watt)
  • Nominal luminous flux 1150-2750lm (lumens)
  • Rated power 10-25W (watts)
  • Color rendering CRI> 80
  • Iris matt 120 °
  • suitable for multi-shift operation
  • Certificates ENEC, CE, ROHS, WEEE

 
0Percent less consumption
0Percent less CO² emissions
0Lumen PRO WATT LED efficiency
0Hours of life expectancy